My laser seems underpowered and sometimes its acting strange, do you have any suggestions for troubleshooting? : Wicked Lasers

Forums/Extensive Knowledgebase/Miscellaneous

Jeice
posted this on September 29, 2011 14:11

For the E2 or E3 laser if it does not work at all or seems underpowered.

Temporary fix: Sometimes the tail piece/end cap is defective. The rest of the laser is functioning fine though.

Take a small piece of aluminum foil about the size of a finger nail. Fold it in half.

Take off the end cap, lay the foil across the positive tip of the battery and make sure

the foil is touching the threads on the inside of the laser as you put the end cap back on.

Be sure to not get the foil in between the threads of the cap and laser as you screw on the cap

as it can jam up the threads and ruin the laser. Email support@wickedlasers.com for a new tail cap.