Will the LaserDock work with my laser projector?

All laser projectors with an ILDA input are fully compatible with LaserDock. Please see here for a list of models we've tested.

If your laser projector is not on the list, it should have the required ILDA support and we recommend using a D25 cable to make sure the plugs fit in properly.

This is in case there may be not enough room (due to the key switch) to plug in the LaserDock directly but it will work for sure with the DB25 male/female cable extension.

Have more questions? Submit a request


Article is closed for comments.
Powered by Zendesk